Line Drawing R25SC

What's on your mind? Anything generic goes here.

Line Drawing R25SC

Postby scuffy 2 on Thu Dec 20, 2018 5:27 pm

Can anyone tell me were I can find a line drawing of a R25SC, I need this for some embroidery work I would like to have done locally ,Thanks for any information.
scuffy 2
 
Posts: 17
Joined: Sun Sep 16, 2018 7:53 pm
City: Sherwood
State/Province: WI
Ranger/Cutwater Model: R-25 SC
Vessel Name: The Lone Ranger

Re: Line Drawing R25SC

Postby zekeandboone on Fri Dec 21, 2018 11:18 am

I'm looking for the same! Let me know if you find anything.
Steve Zedekar
www.stevezedekar.com
zekeandboone
 
Posts: 55
Joined: Wed Feb 10, 2016 10:59 pm
City: Battle Ground
State/Province: WA
Ranger/Cutwater Model: R-27
Non-Ranger Model: Traded in a '17 25SC
Vessel Name: Coorie Doon

Re: Line Drawing R25SC

Postby NorthernFocus on Fri Dec 21, 2018 1:40 pm

scuffy 2 wrote:Can anyone tell me were I can find a line drawing of a R25SC, I need this for some embroidery work I would like to have done locally ,Thanks for any information.

Are you asking for an actual lines drawing of the hull or a simple profile drawing of the boat?
Dan

Never confuse confidence for competence.
NorthernFocus
 
Posts: 988
Joined: Sun Jun 29, 2014 9:02 am
City: Anchorage
State/Province: AK
Ranger/Cutwater Model: R-25 Classic
Vessel Name: Divine Focus

Re: Line Drawing R25SC

Postby Sam Bisset on Fri Dec 21, 2018 1:42 pm

I would check with Kathy at Kathy's Custom Burgees or Howard and Carol Gearheart at Gearheart Embroidery. They both do work for us at the factory. They may have what you're looking for.

mkjw557@icloud.com Kathy's email
h.gearheart@gearheartembroidery.com Gearheart email
Sam Bisset
Marketing Director
Ranger Tugs & Cutwater Boats
Sam Bisset
 
Posts: 128
Joined: Mon Nov 10, 2014 2:21 pm
City: Everett
State/Province: WA

Re: Line Drawing R25SC

Postby scuffy 2 on Fri Dec 21, 2018 2:03 pm

NorthernFocus wrote:
scuffy 2 wrote:Can anyone tell me were I can find a line drawing of a R25SC, I need this for some embroidery work I would like to have done locally ,Thanks for any information.

Are you asking for an actual lines drawing of the hull or a simple profile drawing of the boat?


Thanks for your response - I am just looking for a simple profile of the 25SC so I can have someone embroider it on a shirt with my boat name.
scuffy 2
 
Posts: 17
Joined: Sun Sep 16, 2018 7:53 pm
City: Sherwood
State/Province: WI
Ranger/Cutwater Model: R-25 SC
Vessel Name: The Lone Ranger

Re: Line Drawing R25SC

Postby NorthernFocus on Fri Dec 21, 2018 2:58 pm

scuffy 2 wrote:...I am just looking for a simple profile of the 25SC so I can have someone embroider it on a shirt with my boat name.

There are a couple of crude profile drawings in the owners manual that are probably adequate for that. Also if you can find a PDF copy of the original advertising brochure I seem to recall some graphics in there.
Dan

Never confuse confidence for competence.
NorthernFocus
 
Posts: 988
Joined: Sun Jun 29, 2014 9:02 am
City: Anchorage
State/Province: AK
Ranger/Cutwater Model: R-25 Classic
Vessel Name: Divine Focus

Re: Line Drawing R25SC

Postby scuffy 2 on Fri Dec 21, 2018 4:15 pm

NorthernFocus wrote:
scuffy 2 wrote:...I am just looking for a simple profile of the 25SC so I can have someone embroider it on a shirt with my boat name.

There are a couple of crude profile drawings in the owners manual that are probably adequate for that. Also if you can find a PDF copy of the original advertising brochure I seem to recall some graphics in there.

Thanks. my r25sc is a 2015 that came with a r27 manual, Ranger Tug advised in 2015 that was the manual they issued with the R 25 SC as the 2 boats are almost the same. I also have heard there may have been e line drawing in some ads and a magazine, but so far no luck finding.
scuffy 2
 
Posts: 17
Joined: Sun Sep 16, 2018 7:53 pm
City: Sherwood
State/Province: WI
Ranger/Cutwater Model: R-25 SC
Vessel Name: The Lone Ranger

Re: Line Drawing R25SC

Postby Sam Bisset on Fri Dec 21, 2018 5:05 pm

Hi Scuffy,

I looked back and can't find any (profile) line drawings of the 25. I have a line sketch of the deck plan but that won't help you.

I think I remember seeing it digitized by an embroidery company at some point in the past, I'm assuming it was Howard or Kathy who I mentioned in my earlier post. If I come across anything else, I'll get it to you.
Sam Bisset
Marketing Director
Ranger Tugs & Cutwater Boats
Sam Bisset
 
Posts: 128
Joined: Mon Nov 10, 2014 2:21 pm
City: Everett
State/Province: WA

Re: Line Drawing R25SC

Postby scuffy 2 on Fri Dec 21, 2018 10:17 pm

Sam Bisset wrote:Hi Scuffy,

I looked back and can't find any (profile) line drawings of the 25. I have a line sketch of the deck plan but that won't help you.

I think I remember seeing it digitized by an embroidery company at some point in the past, I'm assuming it was Howard or Kathy who I mentioned in my earlier post. If I come across anything else, I'll get it to you.

Thanks Sam
scuffy 2
 
Posts: 17
Joined: Sun Sep 16, 2018 7:53 pm
City: Sherwood
State/Province: WI
Ranger/Cutwater Model: R-25 SC
Vessel Name: The Lone Ranger

Re: Line Drawing R25SC

Postby scuffy 2 on Fri Dec 21, 2018 10:18 pm

zekeandboone wrote:I'm looking for the same! Let me know if you find anything.

Will Do
scuffy 2
 
Posts: 17
Joined: Sun Sep 16, 2018 7:53 pm
City: Sherwood
State/Province: WI
Ranger/Cutwater Model: R-25 SC
Vessel Name: The Lone Ranger

Re: Line Drawing R25SC

Postby Maggie Anne on Sat Dec 22, 2018 10:31 am

You might try creating one from a regular photo, most photo editing software programs have stylizing algorithms that will create a line drawing. I've attached an example in my Tugnuts album that I just created using Photoshop Elements, based on the image from the Ranger Tug website.
Maggie Anne
 
Posts: 25
Joined: Sat Apr 15, 2017 2:15 pm
City: Blaine
State/Province: WA
Ranger/Cutwater Model: R-27
Vessel Name: Maggie Anne
MMSI Number: 367798830

Re: Line Drawing R25SC

Postby scuffy 2 on Sat Dec 22, 2018 10:49 am

Maggie Anne wrote:You might try creating one from a regular photo, most photo editing software programs have stylizing algorithms that will create a line drawing. I've attached an example in my Tugnuts album that I just created using Photoshop Elements, based on the image from the Ranger Tug website.




Thanks for this good information - I think I might try your suggestion.
scuffy 2
 
Posts: 17
Joined: Sun Sep 16, 2018 7:53 pm
City: Sherwood
State/Province: WI
Ranger/Cutwater Model: R-25 SC
Vessel Name: The Lone Ranger

Re: Line Drawing R25SC

Postby Kim and Ed on Sat Dec 22, 2018 11:16 am

Many of the Apps can produce nice drawings from photos (see below) but still are not what you are looking for to embroider from. Too much detail. Simply tracing over your favourite pic should work well and it will be your boat. Go ahead and discover your inner artist!

gallery2.php?g2_itemId=65990&g2_imageViewsIndex=1
gallery2.php?g2_itemId=65987
Kim and Ed
 
Posts: 26
Joined: Sat Oct 08, 2016 4:44 pm
City: Heriot Bay
State/Province: BC
Ranger/Cutwater Model: R-27
Vessel Name: Tugetherness

Re: Line Drawing R25SC

Postby rpmerrill on Sat Dec 22, 2018 12:08 pm

Here's (sort of) a line drawing of my R-27. Created with some simple app on my Samsung tablet.
It might be enough to generate a line drawing for a t-shirt or business card or stationery. It's on my list to carry it further. Maybe during the long winter?

gallery2.php?g2_itemId=47346
rpmerrill
 
Posts: 366
Joined: Fri Feb 05, 2016 12:44 pm
City: Easton
State/Province: MD
Ranger/Cutwater Model: R-27
Vessel Name: BAY RANGER

Re: Line Drawing R25SC

Postby bob daily on Sat Dec 22, 2018 3:17 pm

I don't know if this will help but it is what I used for hats and tee-shirts for my crew,
Image
bob daily
 
Posts: 180
Joined: Wed Aug 05, 2015 8:08 am
City: Kennewick
State/Province: WA
Ranger/Cutwater Model: R-21 EC
Vessel Name: Scuttlebutt

Next

Return to Chat

Who is online

Users browsing this forum: No registered users and 9 guests