'13 31cb- looking 4info on factory installed electronics pkg

Ask away with your Ranger technical or pre-sales questions. A Ranger rep will give you the official scoop.

'13 31cb- looking 4info on factory installed electronics pkg

Postby Gokotta on Sun Mar 17, 2019 1:38 pm

I'm a soon-to-be-owner of a 2013 Ranger 31CB, and am trying to track down any info - especially instructional manuals - on the electronics package that comes with the boat from the factory...any help to point me in the right direction would be much appreciated.
Posts: 7
Joined: Sun Mar 17, 2019 1:27 pm
City: Manahawkin
State/Province: NJ

Re: '13 31cb- looking 4info on factory installed electronics pkg

Postby jkhiser on Sun Mar 17, 2019 8:29 pm

Prolly the Garmin 7000 series, likely a 7212. Is what came on my 2013 Cutwater.

Try https://static.garmincdn.com/pumac/GPSM ... _OM_EN.pdf

While these no longer receive software support/updates, they are still solid units.

Do not rely on the built in base-map, it will be well out of date. So you will want to buy a current map card.
Kenyon & Maggie Hiser
2013 C-28 WENNIWAY, purchased Feb 2018
- 2005 Maritime Skiff Voyager 23 (Bessie Jane)
- 2005 Nordic Tug 37 (Wenniway III)
- 1989 Egg Harbor 37 (Wenniway II)
Posts: 52
Joined: Fri Feb 16, 2018 12:29 pm
City: Annapolis
State/Province: MD
Ranger/Cutwater Model: C-28
Vessel Name: Wenniway
MMSI Number: 338165185

Re: '13 31cb- looking 4info on factory installed electronics pkg

Postby Spinner on Sun Mar 17, 2019 11:19 pm

I agree. The nav equipment on the 2013 models is still perfectly good. I have the same era Garmin electronics on my current boat; just because the chartplotter isn’t getting software updates, GPS antenna, Radar, Autopilot all can be updated. I just did this today!

Go to the Garmin support website using a PC or laptop, put in the model of chartplotter, and download the updates onto an SD card (max size 32 GB). When you put the SD card with updates in the card slot on your chartplotter, make sure all the equipment is turned on so it will update if possible.

It’s best to use an empty SD card.
Sue Peterson
Current Nordic Tug 42 Spinner
Former R-31 Spinner
Elliott Bay Marina
Posts: 402
Joined: Sun Feb 03, 2013 4:10 am
City: Bellevue
State/Province: WA
Non-Ranger Model: (Former RT31) Current 2003 Nordic Tug 42
Vessel Name: Spinner

Return to Ask the Ranger Factory

Who is online

Users browsing this forum: No registered users and 2 guests