Locker Shelving
For the most part the stowage of the lockers can be doubled by adding shelving. Here are two which I built.
Again, the basic material is PVC tubing. These are 1/2" Schedule 40 and all joints are left "dry", partly because some disassembly or manipulation is required to install or remove them from the lockers. A fair amount of trial-and-error measurement and fitting is done to get the "legs" in the proper spot and to best shape the frame to the locker.
The shelving is 3/16" plywood paneling with three coats of varnish on both sides. After the frames are built, cardboard patterns for the shelf are made and transferred to the plywood after fitting properly.