Request Internal PCB/Control Board for Jabsco 63022 Searchlight

Hello,

I have a Jabsco model 63022 12V remote searchlight head installed on my 2013 R-29. The lamp output and motor functions are not working, and voltage testing shows 12.2–13.2 V present at the input harness, but no usable output at the lamp connector. I emailed Jabsco but did not receive a response.

I have a photo of the board and harness connectors if needed.

Will you confirm:

1) The exact part number and availability of the internal PCB / control board for this model?

2) Whether it is available as a standalone service part, separate from a complete assembly?

3) Any updated replacement board number for this specific searchlight?

Model: Jabsco 63022
Input: 12 V

Symptoms: No lamp/motor output, voltage present on input wires

Thank you,

Fred Thorne
M/V “Sea Spirit”
Coupeville, WA

We don’t have replacement parts or part numbers available for the internal components of the searchlight. We also don’t have information on standalone PCB or control board availability for that model. In cases like this, we typically replace the complete searchlight assembly rather than service individual internal components. I would recommend either replacing it with the same model or upgrading to a comparable or newer searchlight, depending on your preference.

Jared Dunning said:

We don’t have replacement parts or part numbers available for the internal components of the searchlight. We also don’t have information on standalone PCB or control board availability for that model. In cases like this, we typically replace the complete searchlight assembly rather than service individual internal components. I would recommend either replacing it with the same model or upgrading to a comparable or newer searchlight, depending on your preference.

Click to expand...

Thank you, Jared. Can you recommend a searchlight replacement?

Here is what we use now and works great.