wilsonballew
Active member
- Joined
- Jun 30, 2020
- Messages
- 28
- Fluid Motion Model
- C-24 C SE
- Vessel Name
- Gilgamesh
Hi All:
After going through my boat this weekend, I am stumped on getting the Fusion stereo to power up. I've checked the 3 amp fuse on the fuse block and even though it looked fine, went ahead and put another one in. Still no power to the unit as far as I can tell. All other 12v appliances/lights/switches, etc work fine. I have not pulled the unit but I did feel up behind it and it seems wires are connected, but I can't visually see behind the unit so will need to pull it to confirm for sure.
I did notice that there is a bundle of various connection plugs hanging from the back of the unit; looks like pre=amps, various RCA connectors, satellite radio inputs, etc., but I think these are all accessory connections.
Everything appears to be intact and no sign that modifications have been made. Any thoughts would be appreciated - perhaps there is an inline fuse as well?
Tom
After going through my boat this weekend, I am stumped on getting the Fusion stereo to power up. I've checked the 3 amp fuse on the fuse block and even though it looked fine, went ahead and put another one in. Still no power to the unit as far as I can tell. All other 12v appliances/lights/switches, etc work fine. I have not pulled the unit but I did feel up behind it and it seems wires are connected, but I can't visually see behind the unit so will need to pull it to confirm for sure.
I did notice that there is a bundle of various connection plugs hanging from the back of the unit; looks like pre=amps, various RCA connectors, satellite radio inputs, etc., but I think these are all accessory connections.
Everything appears to be intact and no sign that modifications have been made. Any thoughts would be appreciated - perhaps there is an inline fuse as well?
Tom