2021 R27

Status
Not open for further replies.
B

Barco

Member
Joined
Aug 8, 2020
Messages
23
Fluid Motion Model
C-28
Vessel Name
HONU
Hi,
I have a few questions regarding my recently acquired 2021 Ranger Tug R27.
1. Are the cabinets surfaces finished/treated at the factory, if so what material/product was used? Also, if the cabinets are not treated at the factory then what product is recommended to treat and protect the cabinets from stains?
2. The propane storage/distribution pressure regulator is loose, therefore should my next step be to repair or replace the pressure regulator?
Thanks, Louis
 
Hi there,

Yes, the surfaces are finished with Minwax Helmsman finish (satin, I believe). Not sure what you mean about the regulator being loose, but if any part of the assembly is no longer fitting tightly or sealing properly, yes then I would recommend that it is replaced. Hope this helps.

Cheers,

Ralf
 
Hi Ralf,
Do you stock the regulator assembly? if so please share part number and price.
Thanks, Louis
 
Status
Not open for further replies.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top