C-28 Garmin Auto Pilot

Status
Not open for further replies.
M

Mike Wolff

Active member
Joined
Apr 16, 2019
Messages
30
Fluid Motion Model
R-21 EC
Hull Identification Number
FMLC2846414
Vessel Name
The Wolff's Den
MMSI Number
338334141
2014 C-28 Auto pilot screen is so dim I cant read what it is displaying, Any suggestions? Thanks!
 
I assume you are talking about the AP control screen - not the Chart plotter display.

On our R29, once the AP is turned on, do a quick press and release of the power button and a brightness control comes up. Then use the up/down arrows to control the brightness....

I hope that helps.

Rocky
 
I had the same issue with my Auto Pilot screen. The screen was completely dark so couldn’t see if it went to the brightness control function when briefly pressing the power button. The solution I found was to shine a flashlight on the screen. I was then able to faintly read the screen and adjust the brightness control. Hope this may help.
 
Status
Not open for further replies.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top