Cable Routing C-30 CB

dbsea

Well-known member
Joined
Oct 1, 2021
Messages
1,063
Fluid Motion Model
R-23 (Outboard)
Vessel Name
HALCYON
MMSI Number
368365270
How are the cables run from the flybridge into the cabin on a C30-CB? I need to get an ethernet cable from up top into the cabin... trying to figure out what is going to need to be taken apart. Thanks!
 
Good question. I'd like to run a replacement VHF line from up stairs to the area behind the bathroom mirror. At first place looks problematic.

Steve
 
Steve, I’ve figured out that there’s a large wire chase coming down from the bridge in the starboard aft. It enters into the cabin and follows the cabin wall in the same corner, behind some removable panels (remove delicately), where the starboard aft speaker is mounted. That’s all I’ve figured out so far. Will deal with the rest after winter break. Good luck - Dave
 
Hey there Dave,

You are correct. That's the routing point for all the wiring coming from the command bridge. You can run anything else along that path .

Cheers,

Ralf
 
Ralf H said:
Hey there Dave,

You are correct. That's the routing point for all the wiring coming from the command bridge. You can run anything else along that path .

Cheers,

Ralf[/quote/]

Ralf- there’s some sort of white sleeve over the exit of the wire path on the bridge, that runs along the starboard side of the flybridge. It appears somewhat rigid / shrink wrapped. How best to get an Ethernet cable in there?
 
Back
Top