Can’t remove radar overlay on Garmin 7612

[Rocky]

Was on the water this weekend and all was fine. During lunch, I was playing with the Chartplotter and Radar. I was going back and forth between several screens. Nav, Radar, Sonar, etc.
When it was time to leave, I wanted to get back to my regular Nav plotter screen and when I clicked the Nav screen icon, the radar overlay stayed on. I tried several things, including shutting off both plotters. I also shut off the power to them to “reboot” the system and I still have Radar Overlay that I can’t get seem to get rid of.
Did I possibly click on something that created a default? I couldn’t find anything to change that if I did.

Any ideas??

Thanks

Rocky.

 

[Brian B]

From the menu tab did you put the radar on stand-by?
When all else fails I would call Garmin support while you are on the boat. They will hopefully be able to walk you through the fix.

 

[Rocky]

I can put the radar in STBY from the screen...I can also toggle to transmit. All of this is after I have tried to put into in NAV.
I am planning to be at the boat one day this week and will try to figure it out or call Garmin.....

Thanks
Rocky

 

[Andrew Custis]

On the 7612, you can turn on layers and one of these layers from a nav screen is the radar overlay. Go into the menu, select layers and turn that off.

Thanks Rocky,

 

[Rocky]

That maybe what I did..... I'll try that first.
Thanks, Andrew!

 

[Rocky]

Thank you for the tip, Andrew. That was it. Apparently I clicked the Radar Layer at some point..... I went to the layer screen, clicked off the Radar and all is good now.

Thanks

Rocky