JimandTrudy
New member
- Joined
- Jun 2, 2019
- Messages
- 1
- Fluid Motion Model
- C-24 C
- Hull Identification Number
- FMLR2520B313
- Vessel Name
- MaraMika
I have 2013 R-25SC with a Volvo D-3 engine. Recently it developed a low oil pressure fault. I replaced the oil filter which was plugged solid with a black sludge and changed the oil. The engine had to be rebuilt( new piston and journal bearings). After the rebuild the low oil pressure fault reoccurred. The engine starts off at 40 psi and within 15 minutes drops to 27 psi triggering the fault .What is going on. Dealer has been trying but no luck, any suggestions would be helpful