Door lock replacement key

[Duchscherer]

I have a 2013 Cutwater 28. Need to have a key made for the door. It's an odd key. Any thoughts on where to get a blank? Who is the lock manufacturer??

 

[CaptT]

I purchased my blanks from the factory. I know they are no longer in the parts business but they may be able to steer you in the right direction. I'd give them a call or shout out on the factory topic forum.
Any local locksmith can cut the key once you get the blank.
Hope this helps,
Terry

 

[gswearin]

See this thread, I also got one from a local key kiosk.
viewforum.php?f=6

 

[CaspersCruiser]

If your door lock assembly is the same Trioving model as on my 2012 R27, an Ilco T06 blank works fine in the lock and can be purchased and cut at a good locksmith.

 

[Martin610]

It's a steel blank, stain less I think. I had to shop around but I did find a lock shop with the blanks who could cut it. This is a shop that makes keys for the local school districts if that helps.

-martin610

 

[Rockjumper]

I was able to get one at the local Coast hardware. The person helping apologized for the expensive "Sea Ray" type keystock (think it was about $8).

 

[Duchscherer]

Thanks all for the responses. VERY helpful.

 

[SJI Sailor]

Minor note. We got a five pack of matching blanks from Amazon, then had them cut at a keyshop. TV-3D JMA . Trioving Key Blanks (5 pc) [url=https://a.co/d/77nFXTb]https://a.co/d/77nFXTb[/url]

Warning: a couple of them are very slightly too thick and an extremely tight fit in the lock, too much so for comfort. I imagine they're either fake or a bad batch. The others fit OK. For the price I'd get them again but would cut 2x as many as I need and test and keep the good ones.