Leaking at side door

[Irish Mist]

I was just out in some pretty big water and as the waves were going over the boat I noticed my feet getting wet .. It seems when the top 1/2 of hull mated with the bottom 1/2 there is a gap that goes along the distance of the door well I am thinking to use some foam beading that comes in strips to block it. Just wondering if anyone has attacked this already and might share what they did.
Thanks

 

[RProffer]

I would recommend calling your dealer, or Andrew at the factory. In my opinion, that should be a factory fix.

 

[Mystical]

We had the same thing happen. Turns out that the felt strip on the aft section of the door was not in place. Replaced the strip of felt and so far so good

 

[Irish Mist]

This is not the felt strip but along the bottom There is a 3/8 inch gap the distance of the door well

 

[GulfSailor]

I would recommend calling your dealer, or Andrew at the factory. In my opinion, that should be a factory fix.

I agree.
That would be the #1 solution Grandpa Mark.

 

[Irish Mist]

Calling tomorrow I inspected a 2012 today and the area in question on it has very small space tapering to nothing