LED Lights for 2013 R31

S

Scott Keller

Member
Joined
Jul 25, 2020
Messages
21
Fluid Motion Model
C-24 C SE
Hi All - I just bought a 2013 R31 and it looks like all the lights (ceiling, dinette,...) are incandescent as they get warm/hot with use. I would like to change to LED. The ceiling lights are small disks and they don't seem to let me get to the bulb very easily. Does anyone know how to change the bulb in these? I have to gone at them too hard yet as I did not want to break anything.

Thanks!!

Scott Keller
 
Thanks for the quick reply. That site looks good. I really need to know how to get at the bulbs. The lights on the ceiling are little flush things and I don't see how to easily get to the bulb. I have to pried too hard, yet - but I will if that is how you get to the bulbs.

Scott Keller
 
Sorry but I haven't changed mine since the boat became ours.
 
a pair of latex coated gloves also works well to get the grip you need. Push up firmly on the bezel against the overhead and turn about 1/8th to a 1/4 turn counterclockwise. The bezel will stop turning when it is far enough. You may have to pry down on the bezel. I am very happy with the Marinebeam replacements.
 
If any one replaced there ITC 69650-ss lights I am missing one of the bezels to match the one that is there. it's 3" across.
If anyone has one they are looking to sell?
 
You must log in or register to reply here.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top