CaspersCruiser
Well-known member
- Joined
- May 11, 2016
- Messages
- 919
- Fluid Motion Model
- R-27 Classic
- Hull Identification Number
- FMLT2709G112
- Vessel Name
- Cookie
- MMSI Number
- 368203460
During the survey of my 2012 R27, one issue uncovered was a live 12VDC wire for a downrigger installation located in the small storage locker under the starboard entry step. The wire and companion ground were discovered cut clean, but not sealed in any way- not even with electrical tape. The 12VDC wire end was heavily corroded. I capped both wires with a wire nut.
I've become acquainted with another Louisville boater who has purchased a new R27 and I checked the storage locker on his boat for the wires and sure enough, there was a clean cut, but unsealed live 12VDC wire labeled "starboard downrigger". A wire nut was added.
Is there port downrigger live wire? If so, where might I look for it?
I've become acquainted with another Louisville boater who has purchased a new R27 and I checked the storage locker on his boat for the wires and sure enough, there was a clean cut, but unsealed live 12VDC wire labeled "starboard downrigger". A wire nut was added.
Is there port downrigger live wire? If so, where might I look for it?