Parts Needed For Garmin Checkvalve Install

[LMRanger]

While motoring in my RT25SC the steering in manual and AutoPilot wanders all over the place.
I believe from what I've read I need to install the Garmin Check Valve Kit.
I have all of the listed part numbers, but do I need the two new hoses shown in the photo that go from the pump to the check valve body???
If so what is the part number and description of those hoses??

Tired of manual correction,

Ralph
RT25SC
Puffin
LMRanger

Posts: 16
Joined: Wed Jul 03, 2019 3:52 pm
City: La Mesa
State/Province: CA
Ranger/Cutwater Model: R-25 SC
Vessel Name: Puffin

 

[CaptT]

You may want to contact these people. They had a store a few miles from my house and made the hoses on-site. I brought in the check valve and the hoses used on the autopilot pump manifold and they custom made the hoses for me. Make sure when you measure for the length of the hoses you allow for a smooth, long loop so you do not kink the hose. There are a couple of photos in my album.
I walked in with a sketch of what I needed, with measurements, and they had everything I needed including the T connectors.
Hope this helps.
Terry
https://www.goodyearrubberproducts.com/ ... tings.html

 

[LMRanger]

Capt T,
Thank you for the reply and the photos.

Much help

Ralph