Propane stove replacement

ALICE J

Well-known member
Joined
Oct 21, 2014
Messages
407
Fluid Motion Model
C-28
Hull Identification Number
FLM27251011
Vessel Name
ALICE J
MMSI Number
NONEHERES
I need to replace my Princess two burner oven stove on my R 27 2011. Has anyone used a force 10? What model number works, or are modifications to the existing cut out required?
 
ALICE J":3l2b86r5 said:
I need to replace my Princess two burner oven stove on my R 27 2011……
I can’t help with that information, but what failed to cause you to replace it? My boat is a few numbers newer than yours, but I have the same stove/oven.

When you find find a replacement solution, post the details here so those of us with that obsolete stove can prepare.
 
A couple of years ago we replaced the Princess 2 burner electric stoves on our 2010 R 29. The new stove is a Force Ten European model #F63256, Also, needed a trim kit. If you decide to install one, bring the fuse holder out to the cabinet just forward of the stove. The current fuse holder is in the left rear of the stove and not accessible once it's installed.

We're happy with the installation and the stove. On our last boat we had a three burner Force Ten and loved it.


Jim Demerest
2010 R29 Chessie
 
I'm curious why you need to replace a propane stove. What has worn out or broken that is not replaceable? Gary
 
Did you try contacting Seaward? They took over the Princess line. Perhaps they can help you with an exact replacement or perhaps you are looking to change brands. I would also assume that Forece 10 would have a template cutout that you could obtain on line and see how it fits in the current opening.
 
Back
Top