Steamboat_Willie
Active member
- Joined
- Nov 27, 2008
- Messages
- 28
- Fluid Motion Model
- C-24 C SE
- Vessel Name
- Steamboat Willie
Any idea when the R21EC owners manual will be released and available?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
R21EC Owners Manual
- Thread starter Steamboat_Willie
- Start date
- Status
- Not open for further replies.
rustednail
Well-known member
- Joined
- Nov 24, 2008
- Messages
- 45
- Fluid Motion Model
- C-24 C SE
- Hull Identification Number
- FMLT2108F809
- Vessel Name
- Miss Karma
I would love to have an owners manual for my '09 tug? A wiring diagram would be a nice start 🙂
- Joined
- Nov 21, 2008
- Messages
- 1,389
- Fluid Motion Model
- C-24 C
Ok I can really talk about this manual now. I have 99% of the sketches done for the R21. We will be starting to create this manual this week and I would expect it to be complete after Christmas. I will post the manual in the Technical Bulletins. As for the electrical schematics, I do not make these but have some copies I will be happy to share with everyone in the Technical Bulletin section as well.
ron cowan
Well-known member
- Joined
- Nov 23, 2008
- Messages
- 98
- Fluid Motion Model
- C-24 C (Sterndrive)
- Hull Identification Number
- fmlr2123f506
- Vessel Name
- LIL' TOOT
Andrew, This is turning out to be an awsome site with your participation. I know we can bomb you with questions but feel that I must ask since you have shown the data you have. In your prop specs. can you add the prop specs used on the 20 HP Yanmar in the 2006 R21 prior to the EC. I have the last R21 built prior to the EC and have wondered what the prop specs were if I hit the prop. Thank you in advance and please keep up the support of the site.
Per our phone discussion, I did relocate my batteries to the stern area and now have access to my stuffing box and bilge pump without moving the batteries and fuel tank each time. Ron
Per our phone discussion, I did relocate my batteries to the stern area and now have access to my stuffing box and bilge pump without moving the batteries and fuel tank each time. Ron
- Status
- Not open for further replies.
-
Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.
- User menu