R23 ELCI trips on shore power interruption

Status
Not open for further replies.
R

RThorn

Well-known member
Joined
Oct 11, 2022
Messages
79
Fluid Motion Model
C-242 C
Vessel Name
Free Ranger
2019 R23 Ranger Tug
Trying to find out why the ELCI trips on the boat whenever shore power is interrupted or in this case during a power outage.

We have tried resetting the ELCI then turning all of the 120 volt breakers on the boat OFF. Then we turn the shore power breaker off and then back on and the ELCI will trip. It will always reset when pressed.

Not a good position for the boat to be in after a power outage.

Thoughts?
 
I have a 2019 and mine trips as well every time I connect to shore power (I keep it on a mooring). I was told that in that year they had to use a different unit due to a part shortage. I never followed up to replace it because as I mentioned we are on a mooring and when we do dock and hook up to shore power I just hit the reset button and it works fine. You might want to contact the factory.
 
Status
Not open for further replies.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top