R31 fly bridge railings

Status
Not open for further replies.

panache

New member
Joined
Feb 6, 2021
Messages
4
Fluid Motion Model
C-24 C
I would like to move one of the railings on the cabin roof near the center line of the fly bridge deck. Is it simply screwed into the fiberglass or is it attached by though bolts into a backing plate. If it is a backing plate, can I access it by easily undoing part of the interior ceiling covering?
 
Hi panache,

They are through bolted with washers. You should be able to get access to them by removing the sides of the headliner. You'll see the cap covers over the screws in the area where the stanchion would be accessible. Just remove those and you can pull the headliner down a bit for access to them. Hope this helps.

Cheers,

Ralf
 
Status
Not open for further replies.
Back
Top