R31 Head Power

Status
Not open for further replies.
S

Scott Keller

Member
Joined
Jul 25, 2020
Messages
21
Fluid Motion Model
C-24 C SE
Hi All - We just launched our 2012 R31 and the electric main (forward) head is not working. It looks like no power to the panel for flushing and seeing the tank level. I looked at the wiring diagram and there is really no (that I could find) mention of the wiring for this head. Is there a fuse somewhere? Any help would be appreciated.

The aft head has a fuse (and it's fine) but I couldn't find the forward head in the diagrams.

Scott Keller
Walrus
 
Well, I answered my own question. I found a circuit breaker in the compartment behind the electronics that you access from the bedroom and there is a breaker (looks just like the windlass one) for the main head. I reset it and everything is great. I had just had a lot of work done on the electronics (new GPS, Autopilot, Radar) and I suspect they shorted something on this breaker as its right under the GPS.

By the way, you can fit a 19" Garmin display in there if you work at it!!

Scott Keller
Walrus
 
Status
Not open for further replies.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top