Raw water strainer

Status
Not open for further replies.

Gwkessel

Well-known member
Joined
Jul 21, 2020
Messages
98
Fluid Motion Model
R-23 (Outboard)
Vessel Name
Andi Lee
Hello all,
What is the diameter on the raw water strainer top opening where you open to clean strainer basket on a 2016 CB 30 D6
I’m looking at flush kits that connect on the top of strainer.
Thank you,
G
 
I could not find a compatible top mount strainer flush kit that fit the basket on my R31. I went with one that attached directly after the basket.

viewtopic.php?f=24&t=20427
 
Fresh water clean out is not a particularly hard think to make or have fabricated assuming it is similar to those found in R25-27.

gallery2.php?g2_itemId=75362

The current iteration has another quick connect that dumps overflow into bilge with a flexible hose. Clear plexiglas shows water flow. Using a quick connect with a flow valve lets you control flow volume.

Remove existing cap
Install fresh water clean cap
Tighten down bolt to cap and o ring
Direct over flow hose into bilge
Turn on water
Observe flow into motor
Turn on motor
Regulate flow if cup does not have stable level of water
Let engine warm up
Turn off engine
Turn off water at regulator to fresh water cap
Restore stock cap
 
Thanks guys,
Will measure and see what might fit this weekend.
G
 
Status
Not open for further replies.
Back
Top