Sea Spirit
Member
- Joined
- Jul 11, 2025
- Messages
- 16
- Fluid Motion Model
- R-29 Classic
- Hull Identification Number
- FMLT2917C313
- Vessel Name
- Sea Spirit
Hello,
I have a Jabsco model 63022 12V remote searchlight head installed on my 2013 R-29. The lamp output and motor functions are not working, and voltage testing shows 12.2–13.2 V present at the input harness, but no usable output at the lamp connector. I emailed Jabsco but did not receive a response.
I have a photo of the board and harness connectors if needed.
Will you confirm:
1) The exact part number and availability of the internal PCB / control board for this model?
2) Whether it is available as a standalone service part, separate from a complete assembly?
3) Any updated replacement board number for this specific searchlight?
Model: Jabsco 63022
Input: 12 V
Symptoms: No lamp/motor output, voltage present on input wires
Thank you,
Fred Thorne
M/V “Sea Spirit”
Coupeville, WA
I have a Jabsco model 63022 12V remote searchlight head installed on my 2013 R-29. The lamp output and motor functions are not working, and voltage testing shows 12.2–13.2 V present at the input harness, but no usable output at the lamp connector. I emailed Jabsco but did not receive a response.
I have a photo of the board and harness connectors if needed.
Will you confirm:
1) The exact part number and availability of the internal PCB / control board for this model?
2) Whether it is available as a standalone service part, separate from a complete assembly?
3) Any updated replacement board number for this specific searchlight?
Model: Jabsco 63022
Input: 12 V
Symptoms: No lamp/motor output, voltage present on input wires
Thank you,
Fred Thorne
M/V “Sea Spirit”
Coupeville, WA