SCAD TM-1 Digital Monitor Install -Holding Tank

Eagle 2

Active member
Joined
Jul 19, 2025
Messages
28
Location
Long Beach CA
Fluid Motion Model
C-30 CB
Vessel Name
Eagle 2
Installed a new monitor as the one in my head doesn’t really work. The SCAD gives volume of material in the tank in 1/16th increments, which is very helpful in monitoring exactly how full/empty your tank is! I pulled power from the USB plug on the Stbd side of the forward bed wall, drilled down inside the cabinet and ran it down and thru the forward cavity to the holding tank. I still need to calibrate it, which requires a full and empty tank, but I’ve done it before in my Mainship, so I know the process. IMG_5263.jpeg
 

Attachments

  • IMG_5259.jpeg
    IMG_5259.jpeg
    1.8 MB · Views: 23
  • IMG_5258.jpeg
    IMG_5258.jpeg
    2.2 MB · Views: 23
  • IMG_5261.jpeg
    IMG_5261.jpeg
    1.2 MB · Views: 23
  • IMG_5257.jpeg
    IMG_5257.jpeg
    1.3 MB · Views: 21
Also added another USB while I was running power to the top of the bed for the other side so we don’t have wires laying all over the place when watching iPads or phones in bed. IMG_5255.jpegIMG_5256.jpeg
 
Back
Top