Side power thruster on Ranger Tug 21EC

Status
Not open for further replies.
B

Benin

New member
Joined
Sep 8, 2020
Messages
2
Location
Vero Beach, Florida
Fluid Motion Model
R-23 (Outboard)
Hull Identification Number
FMLT21191415
Vessel Name
Creole
The thruster on my Ranger Tug 21 EC is stuck locked in the on position and does not respond to the off switch. I must turn off the main switch to stop the motor from operating. Is there any way to reset the motor to disengage the contacts in the solenoid? Where is the solenoid located on the R21?
 
Benin":2iveq61y said:
The thruster on my Ranger Tug 21 EC is stuck locked in the on position and does not respond to the off switch. I must turn off the main switch to stop the motor from operating. Is there any way to reset the motor to disengage the contacts in the solenoid? Where is the solenoid located on the R21?
Click to expand...

Hello,

You can remove the cables from the thruster motor itself to then be able to work on, the solenoid is under the black cover. Hope this helps.

Thanks,
 
Status
Not open for further replies.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top