Techma Toilet

Toot541

Active member
Joined
Jul 7, 2017
Messages
41
Fluid Motion Model
C-288 C
Vessel Name
Tooter's Tug
2011R29S. Toilet Flushes but doesn’t fill with water. Where is the fuse to the head located? Where is the pump located? When we flush we hear a click but no water. Any help is appreciated. Thanks in advance.
 
There is a breaker for the toilet in at the electronics closet behind the helm and above the hanging locker in the v-berth. The flushing water is supplied by the fresh water pump. So if you don't the fresh water pump on, there will be no water. There is a solenoid valve that opens and closes allowing the fresh water to enter the toilet.
 
Bob, thank you so much for a response. We have determined that we are set up for raw water..we have no solenoid valve so we know there is a pump for it and we have located it forward of the generator but it’s difficult to access.. we would like to know if anyone else has this set up and knows where the breaker is for the raw water pump for the toilet. Any help is appreciated
 
Sounds like a one off design made by a previous owner. Any way to contact one of them?
 
Back
Top