Oh Well
Active member
- Joined
- Jan 24, 2020
- Messages
- 32
- Fluid Motion Model
- C-28
- Hull Identification Number
- FMLT2718G920
- Vessel Name
- Oh Well !!
Have a Ranger 27 OB. We haven't used the electric grill yet but do use the cooler/ live well tub a lot. In the bottom of the tub is a drain that has a threaded fitting in the tub. Have tried to use a 1 1/2" PVC male fitting with a short piece of
1 1/2"of PVC pipe as a riser for the live well, rather than have the live well drain through the water plug and into the bilge.
The question I have is what are the thread specs on that tub fitting? The PVC fitting I tried gets a 1/4 turn at best. My suspicions is that it is either a fine thread vs a course 1 1/2" PVC thread. The other option is it is metric.
Thanks in advance,
Oh Well
1 1/2"of PVC pipe as a riser for the live well, rather than have the live well drain through the water plug and into the bilge.
The question I have is what are the thread specs on that tub fitting? The PVC fitting I tried gets a 1/4 turn at best. My suspicions is that it is either a fine thread vs a course 1 1/2" PVC thread. The other option is it is metric.
Thanks in advance,
Oh Well