Transducer for 2013 R 27

[msu1966]

I am faced with having to replace my Garmin 5212 GPS with the current model 1243 xsv. Can someone tell me what kind of transducer is installed and where it is located?
I recently bought my boat and it's on the trailer and could not see if it is a through Hull transducer.
Thanks,
Ken

 

[trailertrawlerkismet]

On the 2012 R27 we had the transducer was a glued on style. Ours was mounted at the stern of the boat, to the port side of center. If I recall correct open the stern seat cover to gain access behind the tank.

Jim

 

[knotflying]

I could be wrong, but I think the newer model has much better capabilities than the old one and hence could use a newer model chirp transducer. For my money and the trouble I would probably go with a new transducer and an actual thru-hull transducer. It will be more reliable and will also have the capability of water temperature. They are low profile so there won't be a bunk issue while on the trailer. You may want to also ask your supplier for a recommended transducer and see what they have to say.

 

[Osprey]

The in-hull sonar transducer in my 2012 R27 is an Airmar model P27. It is located near the aft starboard corner of the hull. This is a difficult location to reach. One need to remove the floor from the aft cockpit seat to get there. Hope you have long arms!

 

[Ralf H]

Hi Ken,

Most likely you have an Airmar P79 transducer on your boat. Osprey is correct on the location. Hope this helps.

Cheers,

Ralf