Trolling valve

davenpom

Active member
Joined
May 19, 2012
Messages
29
Fluid Motion Model
C-288 C
Vessel Name
Sultana
Can anyone tell me how to use the trolling valve on the R-29?

Not sure if they are all the same. Mine screws out and then it looks as if its to be pushed back in. There is an arrow counterclockwise marked Release. And one clockwise marked hold. When I screw it all the way out, we go no where.
 
davenpom":3ftbtkjf said:
Can anyone tell me how to use the trolling valve on the R-29?

Not sure if they are all the same. Mine screws out and then it looks as if its to be pushed back in. There is an arrow counterclockwise marked Release. And one clockwise marked hold. When I screw it all the way out, we go no where.

This might possibly help if you have the Yanmar engine and transmission.

It sounds as if you may have a mechanically controlled trolling valve, in which case page 41 may help a little, or if it's electronic then page 16 may apply.

2lt25jr.jpg



6qk585.jpg


Obviously, if you have the Volvo engine and transmission then none of the above will apply.
 
Perfect - I never thought to look in the Yanmar manual.
 
Back
Top