AlamedaJen
New member
- Joined
- Jul 1, 2017
- Messages
- 4
- Fluid Motion Model
- C-288 C
- Hull Identification Number
- FMLT2929C010
- Vessel Name
- SCUFFY
Does anyone know how the built in seat in the dinette comes apart for reupholstering?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
upholstering R29 dinette
- Thread starter AlamedaJen
- Start date
Irish Mist
Well-known member
- Joined
- Apr 25, 2012
- Messages
- 1,175
- Fluid Motion Model
- C-288 C
- Hull Identification Number
- FMLT2922K011
On my 2011 R29 The flip seat you need to remove the wine fridge and then take out the screws.You need to remove the cover panel in the cave to undo the screws to the wine cooler first. The other seat I had to open up the breaker panel for part, remove microwave for part and the rest are accessible from the cave and just have plastic caps. All pretty easy just be careful with the breaker panel, disconnect A/C power and go gentle as there is not a lot of extra wire in the panel.
If you are doing the seats yourself. Make sure you get stainless staples for the fabric. I would also get new foam for the seat bottoms. ( the seat on the helm side is not as thick as the other one if you do this check both to get the proper thickness )
Electric carving knife cuts foam really well. And I got one of these https://www.amazon.ca/gp/product/B00D4W ... UTF8&psc=1 to remove the staples.
If you are doing the seats yourself. Make sure you get stainless staples for the fabric. I would also get new foam for the seat bottoms. ( the seat on the helm side is not as thick as the other one if you do this check both to get the proper thickness )
Electric carving knife cuts foam really well. And I got one of these https://www.amazon.ca/gp/product/B00D4W ... UTF8&psc=1 to remove the staples.
AlamedaJen
New member
- Joined
- Jul 1, 2017
- Messages
- 4
- Fluid Motion Model
- C-288 C
- Hull Identification Number
- FMLT2929C010
- Vessel Name
- SCUFFY
Thank you for the information. We just were not certain how everything came apart.
-
Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.
- User menu