DocJoe
Well-known member
- Joined
- Nov 18, 2022
- Messages
- 60
- Fluid Motion Model
- C-242 C
- Hull Identification Number
- FMLT2302E819
- Vessel Name
- Bonus Round
- MMSI Number
- 338469685
Hello,
Neither V-berth reading light works. Voltage at both is 3.5V and should be 12.0V.
Reading light in crawl-in berth works fine and voltage is 12.0.
All fuses are good. Checked all related fuses in two fuse panels behind dash and the one fuse panel in crawl-in berth. All are OK.
No other electrical problems on the boat.
What else should I check?
Thank you for any advice.
Joe
Neither V-berth reading light works. Voltage at both is 3.5V and should be 12.0V.
Reading light in crawl-in berth works fine and voltage is 12.0.
All fuses are good. Checked all related fuses in two fuse panels behind dash and the one fuse panel in crawl-in berth. All are OK.
No other electrical problems on the boat.
What else should I check?
Thank you for any advice.
Joe