CaptainMatt
Member
- Joined
- Aug 31, 2020
- Messages
- 5
- Fluid Motion Model
- C-28
- Hull Identification Number
- FMLT2768C020
- Vessel Name
- BLue Jean
I have a new RT R-27 and the 1.5" pumpout adapter (1.5") at our marina was too large for our waste deck plate. The only info I could find on the forum was that the waste water plate is 1.5" but apparently that is the OD and not the ID. I took a chance and ordered a Sealand 1.25" - 11.4 adapter and it works. Be aware that every picture of this adapter that I saw online shows it being a 1.5" adapter; however, as long as you're order a 1.25" - 11.4 you should be fine. If this info is posted somewhere else in the forum, I apologize for being repetitive.