Zundels
Well-known member
- Joined
- Sep 8, 2010
- Messages
- 117
- Fluid Motion Model
- C-248 C
- Hull Identification Number
- FMLT2515G809
- Vessel Name
- (2009) Kya Rose
Our bow windless foot switches have not worked since we purchased the boat three years ago. Diagnosing the problem and found one bad switch and replaced it. We have found that the relay is sending power toward the bow. Yet the bow windless switches do not work.
We are diagnosing that the wire must be separated between the relay box behind the helm and the bow foot switch. I've removed several mouse fur panels and did not see any wires.
Where are the wires connected and how can we check the connection? (as the two wires, one going from the relay and one attached to the switch are different) Or, can we connect a small cord and run new wires?
We have a 2009 R-25.
Would like to get the foot switches working, help. Thank you Don
We are diagnosing that the wire must be separated between the relay box behind the helm and the bow foot switch. I've removed several mouse fur panels and did not see any wires.
Where are the wires connected and how can we check the connection? (as the two wires, one going from the relay and one attached to the switch are different) Or, can we connect a small cord and run new wires?
We have a 2009 R-25.
Would like to get the foot switches working, help. Thank you Don