R29 pump out fittings

[David&Carolyn]

New to boat ownership. Local marina is having an issue pumping out out Ranger Tug R29 (2015). Apparently they do not have a fitting for the pump out.

Can anyone tell me the size and threads of the required fitting? Seems I should order one and keep it on the boat.

Thanks
David

 

[S. Todd]

I carry one for this very reason. Pumpout fitting is 1 & 1/4 inches.

 

[David&Carolyn]

And the Treads per inch?

 

[S. Todd]

I was not concerned about the threads per inch measurement because when I ordered mine from a marine supplier I don't recall that being an option. Are you finding a supplier with optional threads per inch for the pump out fitting?

 

[S. Todd]

I just looked at West Marine and they do have a pre 1995 model that has 16 threads per inch. I am fairly certain that our 2015 and 2021 Ranger Tugs both have the 11.5 threads per inch version.

 

[David&Carolyn]

I just looked at West Marine and they do have a pre 1995 model that has 16 threads per inch. I am fairly certain that our 2015 and 2021 Ranger Tugs both have the 11.5 threads per inch version.

Thanks for the information. I will pick one up and leave it on the boat.