150hp volvo versus 200hp

Status
Not open for further replies.
O

oarplay

Member
Joined
Aug 28, 2019
Messages
9
Fluid Motion Model
C-24 C
Non-Fluid Motion Model
shopping
From what I have read and can find these two set ups are the same but the HP can you tell me if the gearboxes are the same to thanks Rick
 
any one working in the Ranger Tugs Factory Support
 
oarplay":2c852gi4 said:
any one working in the Ranger Tugs Factory Support
Click to expand...

Hello,

Sorry for the delay we have been busy with our Factory Rendezvous as well as getting caught up after being away for a week. Please see below on the engine configurations we used when we installed the D3:

D3-150 1.51:1 Ratio HS45AE-trans

D3-200 2.03:1 Ratio HS45AE-trans

Hope this answers your question.

Thanks,
Kevin Lamont
 
thanks Kevin very help full one more thing if you do not mind on the 25 and 27 with the D3 can you tell me what prop was on each boat
Thanks Rick
 
oarplay":2h0d6e3j said:
thanks Kevin very help full one more thing if you do not mind on the 25 and 27 with the D3 can you tell me what prop was on each boat
Thanks Rick
Click to expand...

Hey Rick,

R25: Acme 1386 17.0x14.0 3B

R27: Acme 1118 17.0x17.0 3B

The number after Acme is their part number and you can see anymore additional info on their website, hope this helps!!

Thanks,
Kevin Lamont
 
Status
Not open for further replies.

  • Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.

  • User menu
Back
Top