Capt Rob
Member
- Joined
- Nov 21, 2024
- Messages
- 23
- Location
- Marina Lake Arrowhead Georgia
- Website
- www.kyscboathouse.com
- Hull Identification Number
- ABV00488L889
- Non-Fluid Motion Model
- Com-Pac Sailboat
- Vessel Name
- TRIO
The fuel pump on my Mase 2.5K generator needs to be placed. After much effort and special Allen wrenches, I was able to removed the top white rear clam shell I was hoping to find easy access to the fuel pump which I can see. However, the fuel pump is in the lower clam shell. 🙁
So, I am wondering how easy it would be to unbolt the generator from its location. This would allow me to pickup the whole generator. This would give me easier access to the fuel pump by removing the lower shell.
Going forward, I am also wondering, if I really need to replace the white shells since the generator is all enclosed under the port aft cockpit step. 😎
So, I am wondering how easy it would be to unbolt the generator from its location. This would allow me to pickup the whole generator. This would give me easier access to the fuel pump by removing the lower shell.
Going forward, I am also wondering, if I really need to replace the white shells since the generator is all enclosed under the port aft cockpit step. 😎