2012 R27 Classic - Access to Back side of AC Breaker Panel

[mfreeman_1998]

I would like to get access to the backside of the AC breaker panel to add a new AC circuit.

Question:
- What is the process or procedure for pulling the panel so I can add an additional AC circuit?

I don't see any screws or fasteners to release the panel from the front side. Is there a trim cover or something that can be removed to provide access to the mounting screws?

Thanks,
Mike

 

[Admiral S]

The top and bottom of each column pop off to reveal the screws.

Once you unscrew you will have limited wire length to pull the panel off to access and work on.

Be sure to kill 120v and 12v power before sticking your hands in there

 

[mfreeman_1998]

Thanks for the quick reply. I'll give it a try as far as removing a trim strip to get access to the fasteners which hold the planel in place. Hopefully my BlueSea Systems panel is similar to yours. Here's some pictures of my breaker panel:

https://photos.google.com/share/AF1...?key=N2U4dXJ1WFJoQUEzcFRTbVpUZTMyb3VUb2ZoYWdn

Thanks for your help!

MIke

 

[Admiral S]

Your photo is correct. the piece with the 12v DC sticker pops off, as well as the one with the BlueSea logo. They just pop off with a little bit of angled force.