Mike Wolff
Active member
- Joined
- Apr 16, 2019
- Messages
- 32
- Fluid Motion Model
- R-21 EC
- Hull Identification Number
- FMLC2846414
- Vessel Name
- The Wolff's Den
- MMSI Number
- 338334141
My horn spits out rust and sounds horrible. any suggestions to correct this?
2014 Cutwater C-28
- Thread starter Mike Wolff
- Start date
- Status
SummerSteve
Well-known member
- Joined
- Feb 12, 2018
- Messages
- 87
- Fluid Motion Model
- R-21
- Vessel Name
- Seamonkeys
https://www.youtube.com/watch?v=grcoEV-D0Y0
Hopefully you can cut and paste the link - more info on fixing horns than you need - bit a good video.
If link doesnt work, try googling "boat horn diaphragm repair"
It's usually just an adjustment - but you may need to disassemble and clean the diaphragm with fine sandpaper - easily done.
Hopefully you can cut and paste the link - more info on fixing horns than you need - bit a good video.
If link doesnt work, try googling "boat horn diaphragm repair"
It's usually just an adjustment - but you may need to disassemble and clean the diaphragm with fine sandpaper - easily done.
Cutwater28GG
Well-known member
- Joined
- Jan 14, 2016
- Messages
- 1,989
- Location
- seattle
- Fluid Motion Model
- R-21 EC
- Non-Fluid Motion Model
- Cutwater 28
- Vessel Name
- Living The Dream
i took mine apart and cleaned the contacts and lubricated well. the sound came back. ultimately they rust out.
Mike Wolff
Active member
- Joined
- Apr 16, 2019
- Messages
- 32
- Fluid Motion Model
- R-21 EC
- Hull Identification Number
- FMLC2846414
- Vessel Name
- The Wolff's Den
- MMSI Number
- 338334141
Thanks for the suggestions! ill give it a go!
- Status