Thomas22
New member
- Joined
- Feb 13, 2025
- Messages
- 3
- Fluid Motion Model
- C-28
- Hull Identification Number
- FMLC2825K617
- Vessel Name
- Pinot
Hi Folks:
I recently bought a 2017 Cutwater 28 that the previous owner did not take particularly good care of and the survey done did not catch. I'm trying to clean the shower sump which is next to the depth transducer. The sump's location is half under the shower floor which is inaccessible (as are the sump cover screws) and half in the depth transducer compartment. Any suggestions for getting the shower sump cover off for cleaning would be greatly appreciated... Thanks, Thomas
I recently bought a 2017 Cutwater 28 that the previous owner did not take particularly good care of and the survey done did not catch. I'm trying to clean the shower sump which is next to the depth transducer. The sump's location is half under the shower floor which is inaccessible (as are the sump cover screws) and half in the depth transducer compartment. Any suggestions for getting the shower sump cover off for cleaning would be greatly appreciated... Thanks, Thomas