2019 Cutwater 30CB Transmission Solenoids

Cutter 30124

Member
Joined
Sep 15, 2023
Messages
10
Fluid Motion Model
C-30 CB
Vessel Name
Potomitan
2019 Cut 30CB, Volvo penta D6 435. I'm getting the "Check Shift Actuator" alarm and error code on the VP helm display. Won't shift into F or R, and will not rev above idle. Luckily, boat is in my home slip. VP tech unavailable in my area for several days or weeks. First, what transmission was used in these boats? Also what is the part number for the replacement transmission solenoids, and where can I get them? Everything is pointing to these as the problem, and I'm assuming they are replaceable without any special tools? Thanks.
 
Hi there,

Apologies but you would need to contact Volvo to get the information on the solenoids, as we do not carry them or the transmissions separately. A quick phone call to them should work. Yes, you are right that the solenoids have probably failed. Good news is that they are easy to replace. I don't remember the exact tools but they are basic (socket set, i think). Hope this helps get you started.

Cheers,

Ralf
 
Thanks Ralf! I was able to get the part numbers from Fluid Motion and order them from a retailer in Michigan. Extremely expensive, but easy install by my local Volvo tech. Computer cleared of errors, and no problems since. Thank you!!
 
Back
Top