2021 R25 pumpout adapter

[jlstanley]

Can anybody tell me the correct pumpout adapter needed for my 2021 R25? Thank you.
Judy

 

[jayslu]

You want the 1¼” inside diameter pumpout adapter with 11.5 threads per inch. I bought one from Fisheries Supply.

Jay

 

[jlstanley]

Thanks Jay. Much appreciated.

 

[glider4]

When we were at Lake Powell a few years ago they didn’t use the standard pump out setup found at most PNW marinas. I was told many fresh water lake marinas require the adapter. We had to use one of these:
CAMLOCK - 125F POLYPROPYLENE CAM & GROOVE FITTING; 1-1/4 INCH MALE ADAPTER X 1-1/4INCH MALE NPT https://a.co/d/i2T9kcT
And some 1 1/4 “ ABS or PVC NPT (11.5 TPI) male threaded (both ends) nipples.
and a double female threaded 1 1/4” coupler.
If you want to get fancy you could use a 90 degree coupler. Which is what we did to get a better angle to the pumpout hose. We have used the adapter on both a 2009 R-25 Classic and a 2017 C-28 with success.
Should be under $20 total.
We have used our adapter in the PNW as well at Powell River, BC that did not have the standard fitting when we were there last year.

 

[jlstanley]

Thanks for the info Glider4.