JohnFP
Member
- Joined
- Dec 7, 2020
- Messages
- 9
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- Ranger Tug 2022 R25 OB
- Vessel Name
- My Sharona
Came down to the marina and the outboard was leaning to the starboard side of the boat (motor is in up position and out of the water). Straightened the motor back to the center position and an hour later it was leaning back to the starboard side. Position of wheel in the same position and hadn't moved. Checked the hydraulic fluid at steering and it is not low. Checked for leaks at fittings I can get at and no leak observed. Any suggestion on what is going on? This has never happened before in three years?