2022 R27 macerator valve

[Satu-Lagi]

Ranger Factory,

Our 2022 R27 macerator valve has pulled away from the internal (was held to the hull with 2 small screws), It should not have, but has.
I am unable to access the area below the galley sink, area is very small and unable to get my upper body into the area. Please pass along instruction on how the galley cabinet doors can be removed and how to remove the center wood trim splitting the galley sink doors. If I can remove this wood trim, I can access the macerator to remount to the hull. These screws have not normal screw head, they appears to be stared screw heads an I am unable to located a drill bit to remove these types of screws.

regarding the wood trim splitting the galley sink space, the trim has one screw on the base, but then somehow affixed to the rest of the galley counter.

in need of Ranger Tug factory assistance.

thank you

 

[Jared Dunning]

Hello,

The cabinet doors can only be removed at the hinges. The center wood splitting the galley cabinet doors cannot be removed, as it supports the cabinet. The screws used are square heads and require a #2 square bit. Alternatively, you can use a Phillips screw, but ensure it is the same length and size.

Jared