2026 R27 - Electrical Systems 101: Battery Monitor/Starboard Side Lazarette - Learning Everyday

SwimoffTodd

New member
Joined
Sep 18, 2026
Messages
4
Location
New Jersey
Fluid Motion Model
R-27 (Outboard)
Hull Identification Number
FMLT2751A626
Vessel Name
Wish You Were Here
MMSI Number
338572461
Good Afternoon TugNuts:

My 2026 R27 2x150 is resting on the trailer for the winter here in NJ. We enjoyed several late summer/early fall excursions up and down the Delaware River, as well as down to Chesapeake City after purchasing her in early August. She is completely covered from the solar panel to below the waterline with the amazing cover from Fisher Canvas from just up the road in Burlington, NJ, I am a huge cover fan after owning several small sailboats with full top/bottom covers.

I am getting up to speed on all of the features of the boat and learn something new every time I step aboard.

My biggest gap is the electrical systems of the boat. And I hope I can ask the "dumb questions" here to add to my knowledge base. I have reviewed the owners manual pages on the Ranger Tug website, electrical schematics, as well as the individual product manual and websites and, to be honest, I still have a few what I am sure many of you will think are "dumb questions". So here goes...

Just above the sink (photo attached) is the Victron BMV-712 battery monitor - which battery/which batteries are being monitored? Engine only? Lithium only? All of the batteries? When it read 18.7% today this morning when I arrived, and I plugged in and it rose to 23% in about an hour, which battery or batteries are being charged? I clearly have not connected to it via bluetooth - that will be on my to do list for my next visit.

In the starboard lazarette, there are 3 significant pieces of electrical hardware:

1. ABSO DC to DC 50A charger - I think I have figured this one out - this takes the charge from the solar and/or the engine alternators to charge batteries. Thus, with my solar covered and my engines resting until next season this charger is also "hibernating for the winter". My question is which batteries, all of them? I believe yes, the solar panel schematic appears to show all of the batteries (4) but would like to confirm.
2. Promariner Prosafe Failsafe 30A Galvanic Isolator - Google AI says: Acts as a one-way electrical gate on your boat's safety ground wire that stops underwater metal parts from being eaten away when you are plugged into dock power. Sounds good to me!
3. ABSO 50A AC Charger - This charges the batteries (when it is turned on at the electrical panel - photo attached) when plugged into shore power - and my assumption is it charges all of the batteries? Do I have that right? It also has a fan that runs even on a cooler morning like today.

I appreciate all of your guidance as I continue to learn everyday.
 

Attachments

  • tempImagebSjaoR.png
    tempImagebSjaoR.png
    1.8 MB · Views: 5
  • IMG_2844.jpg
    IMG_2844.jpg
    884.8 KB · Views: 4
Good Afternoon TugNuts:

My 2026 R27 2x150 is resting on the trailer for the winter here in NJ. We enjoyed several late summer/early fall excursions up and down the Delaware River, as well as down to Chesapeake City after purchasing her in early August. She is completely covered from the solar panel to below the waterline with the amazing cover from Fisher Canvas from just up the road in Burlington, NJ, I am a huge cover fan after owning several small sailboats with full top/bottom covers.

I am getting up to speed on all of the features of the boat and learn something new every time I step aboard.

My biggest gap is the electrical systems of the boat. And I hope I can ask the "dumb questions" here to add to my knowledge base. I have reviewed the owners manual pages on the Ranger Tug website, electrical schematics, as well as the individual product manual and websites and, to be honest, I still have a few what I am sure many of you will think are "dumb questions". So here goes...

Just above the sink (photo attached) is the Victron BMV-712 battery monitor - which battery/which batteries are being monitored? Engine only? Lithium only? All of the batteries? When it read 18.7% today this morning when I arrived, and I plugged in and it rose to 23% in about an hour, which battery or batteries are being charged? I clearly have not connected to it via bluetooth - that will be on my to do list for my next visit.

In the starboard lazarette, there are 3 significant pieces of electrical hardware:

1. ABSO DC to DC 50A charger - I think I have figured this one out - this takes the charge from the solar and/or the engine alternators to charge batteries. Thus, with my solar covered and my engines resting until next season this charger is also "hibernating for the winter". My question is which batteries, all of them? I believe yes, the solar panel schematic appears to show all of the batteries (4) but would like to confirm.
2. Promariner Prosafe Failsafe 30A Galvanic Isolator - Google AI says: Acts as a one-way electrical gate on your boat's safety ground wire that stops underwater metal parts from being eaten away when you are plugged into dock power. Sounds good to me!
3. ABSO 50A AC Charger - This charges the batteries (when it is turned on at the electrical panel - photo attached) when plugged into shore power - and my assumption is it charges all of the batteries? Do I have that right? It also has a fan that runs even on a cooler morning like today.

I appreciate all of your guidance as I continue to learn everyday.

The BMV712 Battery monitor is for the house battery bank, which is LFP. There is no need to have a battery monitor on the engine or thruster batteries which are AGM. Engine and Thruster stay fully charged, most of the time, as they are infrequently used.

The ABSO Dc to DC 50 amp charger is a dual purpose device. It has inputs from the engine battery and from the solar panel. Output goes to the house battery bank only. Engine and solar charging, but not both at the same time, whichever is stronger is where the charge comes from.

The battery charger will charge the house bank first, then engine battery then thruster battery. It's one battery charger that cycles between 3 outputs until all are charged to 100%.

Here's an electrical schematic. This shows 6 batteries, but its the same with only 2.
 
Back
Top