25 Ranger rudder Zinc?
- Thread starter 6969
- Start date
- Joined
- Nov 21, 2008
- Messages
- 1,389
- Fluid Motion Model
- C-24 C
There is no rudder Zinc on the R25. The rudder on the R25 is bonded through the bonding grounds. Hope this helps!
henrym
Well-known member
- Joined
- Nov 29, 2008
- Messages
- 116
- Fluid Motion Model
- C-248 C
- Hull Identification Number
- FMLT2575A808
- Vessel Name
- Little Toot
If you want to add a zinc to the rudder, drill a ¼" hole trough the rudder and install a R-3 Rudder Zinc Anode - 3¾" Diameter, for $10±. By doing this you will not have to replace the more expensive Propeller Nut Anode so frequently. On hull #75 the Propeller Nut Anode was the only Ranger installed zinc that was protecting all the underwater metal. I have installed a rudder and trim tab zincs that are now being reduced at about the same rate as the prop zinc.
Henry
Henry