Anchor rode legnth for stock C30 2018 boat?

Status
Not open for further replies.

serpa4

Well-known member
Joined
Jun 20, 2020
Messages
286
Fluid Motion Model
R-23 (Sterndrive)
Hull Identification Number
FMLC3051D818
Vessel Name
DayLo
MMSI Number
368173760
I always though the C30 came with 50ft chain and 150 rode/rope.
On the Cutwater website today it says 50' HT chain, 200' line.
I'd measure, but my boat is in storage.
Do I have 150 ft or 200 ft?
 
Regardless, 50 of chain is minimum, for that size of boat I would double the chain to protect you in case you are caught in a storm. You will sleep better! Also look at the anchor size! For a lunch stop almost anything will do but to sleep at night ....
 
Thanks. I have a 35lb mantus on the front.
 
Hi serpa,

I checked our records, and in 2018 we were supplying either the stock 50' 5/16" G4 Chain with 225' 5/8" Plait Line, or an optional kit that contained 100' 5/16" chain and 225' 5/8" Plait Line. You would have to check to be sure, but that is what was available at the time. Hope this helps.

Cheers!

Ralf
 
Measured today.
50ft chain.
200ft of rope. It measured about 195/196, but I could easily stretch it out. It's had a few bumps and such, so I give it a 200ft measurement.
250 feet total. Not bad.
 
Status
Not open for further replies.
Back
Top