Bottom Paint
- Thread starter rheimb1
- Start date
trailertrawlerkismet
Well-known member
- Joined
- Feb 23, 2011
- Messages
- 2,519
- Fluid Motion Model
- C-24 C
- Vessel Name
- (2022) Kismet
I do not know but if you do not get your answer here I'd suggest giving Andrew, Kenny or Ivan a call at the factory in Kent.
Jim F
Jim F
jcarrdive
Well-known member
- Joined
- Jan 2, 2014
- Messages
- 151
- Fluid Motion Model
- C-302 SC
- Vessel Name
- Wallowa
We are having ours done now (sanded down and repainted) at CSV in Des Moines (I'm told they do all the Rangers). I think someone above answered your paint question already, but there is another paint.
We are having our trim tabs done to prevent mussels and barnacles also. It is a different kind of paint. We are also clear coating the prop and rudder to keep the little vermin off of them for a while longer. Not sure what kind of paint they are using but I can find out if you would like me to.
Jeff
Bobolink R27
We are having our trim tabs done to prevent mussels and barnacles also. It is a different kind of paint. We are also clear coating the prop and rudder to keep the little vermin off of them for a while longer. Not sure what kind of paint they are using but I can find out if you would like me to.
Jeff
Bobolink R27
seadot
Well-known member
- Joined
- Apr 11, 2015
- Messages
- 56
- Fluid Motion Model
- C-30 S
- Vessel Name
- Heck or High Water
How well does the Sea Hawk AF-33 fare being loaded and unloaded on a trailer?
The prior owner of my Cutwater 28 had the bottom painted by a third party and the bottom paint scraped off where the boat is in contact with the trailer. I plan to paint the bottom over the winter but want to use paint that won't scrape off when loading/unloading the boat.
The prior owner of my Cutwater 28 had the bottom painted by a third party and the bottom paint scraped off where the boat is in contact with the trailer. I plan to paint the bottom over the winter but want to use paint that won't scrape off when loading/unloading the boat.
knotflying
Well-known member
- Joined
- Jul 25, 2010
- Messages
- 6,014
- Fluid Motion Model
- C-28
- Hull Identification Number
- FMLT2731J011
- Non-Fluid Motion Model
- 25' Parker & 246 Robalo Cayman
- Vessel Name
- http://illusionsmikeandjess.blogspot.com
I have always used Petit Vivid Black and use Liquid Rollers on the bunks. Never an issue. I would check with Petit to determine what you may have to do to apply the Vivid over the existing product.
elan
Well-known member
- Joined
- Nov 16, 2014
- Messages
- 78
- Fluid Motion Model
- C-24 C
- Non-Fluid Motion Model
- Cutwater 26
- Vessel Name
- Elan
Good evening seadot,
Unfortunately I don't think their is any bottom paint or any outher paint that won't scrape off when loading your boat on or off unless you just flote it on, flate it off?
I think you will find that when you flote it on, flote it off your problem will GO AWAY.
Enjoy boating this winter!
Happy holidays,
Mike
M/V Elan
2012 Cutwater 26
Unfortunately I don't think their is any bottom paint or any outher paint that won't scrape off when loading your boat on or off unless you just flote it on, flate it off?
I think you will find that when you flote it on, flote it off your problem will GO AWAY.
Enjoy boating this winter!
Happy holidays,
Mike
M/V Elan
2012 Cutwater 26