Burgee staff

[tlkenyon]

OK...maybe this is a very easy (dumb) question...how does on go about affixing a burgee to the bow burgee staff? I have attached a couple of photos in case my burgee staff is missing some parts or something.
Thanks
TK

 

[SnugTug]

You are missing small snap clips that seat into the tiny holes in the outside of the clamps.

You can see a similar setup here from Overton's showing with snap clips attached:

http://www.overtons.com/modperl/pro...ap-Clamp-On-Stainless-Steel-Flag-Pole&i=95113

 

[tlkenyon]

I thought (hoped) I was missing some parts. I will look through the stuff that came with the boat...again. Gotta imagine that those clips are pretty readily available on the market...

THANKS!!!

TK

 

[SnugTug]

Check the flag or burgees that might have come with the boat (if any). This is were they usually end up still attached to the grommets.

 

[tlkenyon]

Looked thru all the stuff that came with the boat...including the Volvo burgee that was included. No clips. Been looking on-line. The only ones that appear to be available are from Taylor and they get a 1.5 of 5 review rating. Gonna use them for my AGLCA burgee and kinda hate to lose it...

Kinda wonder of maybe Kenny or Andrew could drop a couple of them in an envelope...

TK

 

[Red Raven]

Call Richard Becker in parts at Ranger Tugs.

 

[SnugTug]

Found em:

http://www.duckworksbbs.com/gear/burgee/index.htm

Good luck.

John

 

[tlkenyon]

Ordered... a bunch. Wow...the power of Tugnuts.

THANKS A BUNCH!!!

TK

 

[SnugTug]

Happy to assist. 😀