C28 potable water pump

[pleeson]

Quick question. Can somebody please give me a heads up on where to access the house water pump in a Cutwater 28? I'd appreciate the head start. Time to have a look at what I presume will be an integral filter...

 

[Cutwater28GG]

you will need to unscrew a few screws in the starboard panel and it pulls away. easy once you have done it the first time. I dont need to remove the cusion to do this. its basically underneath the throttle assembly and right of the water tank to give you a sense of the location

 

[BB marine]

gallery2.php?g2_itemId=47206
The photo above shows the pump location. The pump is fwd of the water filter. Remove monkey fur bulkhead. I cut a hatch in the bulkhead to get a quick access to the filter and pump gallery2.php?g2_itemId=47209&g2_imageViewsIndex=1
gallery2.php?g2_itemId=47212&g2_imageViewsIndex=1

 

[pleeson]

Thanks guys. Brian has a nice set-up with his new hatch and whole house filter. I'll crawl in there and see what I can do. Yet another example of not building for what is going to be routine maintenance. I figured it was a deep dive in the cave but helpful to see that it is close to the port side.

 

[scubabob]

Thanks Brian.

I was looking to start working on my water system and came across your post and thank you so much. I also have a covered 26 and this will help a lot.
Would you know the make and model of the water filter?
Thanks and advance have a great day!

 

[BB marine]

Thanks Brian.

I was looking to start working on my water system and came across your post and thank you so much. I also have a covered 26 and this will help a lot.
Would you know the make and model of the water filter?
Thanks and advance have a great day!

DuPont WFPF38001C Universal Valve-in-Head Whole House Water Filtration System. The mounting bracket I used for the filter is DuPont WFAB150 Valve-in-Head System Bracket.