You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Clarion CMD6
- Thread starter donnevin
- Start date
- Status
- Not open for further replies.
tugpup
Member
- Joined
- Apr 27, 2010
- Messages
- 5
- Fluid Motion Model
- C-248 C
- Hull Identification Number
- FMLT2542G708
- Vessel Name
- Sea Ranger
Hi Donnevin and all fellow tugnuts...
I have found a resource for most, if not all, questions relating to our Clarion Receivers older models as well as the current CMD6 series.
The website is: www.marineaudio.com I happen to have a CMD4A model installed in my R-25 and one of the black control knobs on the lower left of the front panel broke loose when it got fouled up with a tape measure. By going to the marineaudio website, clicking on Clarion (they sell other stuffas well) and clicking on support I was able to find telephone numbers and got their tech support guy. After briefly explaining my problem he is sending a replacement knob.... FREE !
What is way more important however, is that these folks know all about various Clarion units and are willing to explain differences, hookups, harnesses, sizes of base units and remote units etc. There is much info on the website itself like manuals and specs for the old and new models if you are interested in upgrading. I am not sure but I think the CMD6 will fit into the CMD4/5 panel hole but the 6 is a few inches deeper than the other units. It certainly appears to be technologically innovative state of the art equipment. Best bet is to call or email them.
I tried to Google Clarion and while I did get to the Clarion website that's about as far as I got because there was no understandable info there...
Hope this info helps clarify some of the Clarion questions. Happy tugging to all, tugpup
I have found a resource for most, if not all, questions relating to our Clarion Receivers older models as well as the current CMD6 series.
The website is: www.marineaudio.com I happen to have a CMD4A model installed in my R-25 and one of the black control knobs on the lower left of the front panel broke loose when it got fouled up with a tape measure. By going to the marineaudio website, clicking on Clarion (they sell other stuffas well) and clicking on support I was able to find telephone numbers and got their tech support guy. After briefly explaining my problem he is sending a replacement knob.... FREE !
What is way more important however, is that these folks know all about various Clarion units and are willing to explain differences, hookups, harnesses, sizes of base units and remote units etc. There is much info on the website itself like manuals and specs for the old and new models if you are interested in upgrading. I am not sure but I think the CMD6 will fit into the CMD4/5 panel hole but the 6 is a few inches deeper than the other units. It certainly appears to be technologically innovative state of the art equipment. Best bet is to call or email them.
I tried to Google Clarion and while I did get to the Clarion website that's about as far as I got because there was no understandable info there...
Hope this info helps clarify some of the Clarion questions. Happy tugging to all, tugpup
- Joined
- Nov 21, 2008
- Messages
- 1,389
- Fluid Motion Model
- C-24 C
Well put tugpup! Marine Audio is actually where we purchase all of our units and are very knowledgable.
- Status
- Not open for further replies.
-
Tugnuts.com is the community hub for Ranger Tug, Cutwater, and Solara owners. Since its inception in 2008, the Tugnuts forum has grown into an active and thriving community of more than 9,000 members. It serves as both a meeting place for the best boating community online, and an invaluable archive of information.
- User menu