Command Bridge table

[Jfrano]

Have a 2017 29CB, table always seems to come out of its base. Is there a way to better secure it?

Thanks
Joe

 

[FlagShip]

Is it the base post to table connection, or base post to deck connection that's troublesome? For the base post to deck, turn the post clockwise so the tab locks in, then turn the black 'thing' at the bottom of the post counter-clockwise to tighten it and secure the post.

 

[Jfrano]

Thanks, will give that a try.

 

[aculverwell]

I have the same issue-- even when I tighten the black 'thing' as much as possible. I have had some (limited) success putting electrical tape on the base plate so that it creates a bit more friction for the black 'thing' to grab onto. Looks bad though.

 

[baz]

The stock pedestals are quite wobbly no matter how much tightening you do. My advice for dealing with this is to replace it with Garelick 75640 Quick Release Table Pedestal System such as found here...

http://www.discountmarinesupplies.com/product.cgi?product=131918&group=129368

https://www.amazon.com/Garelick-Eez...e+Pedestal+System&psc=1&qid=1570747681&sr=8-1

I installed one on my previous R27/OB and it worked VERY well.